Multi-Engine

Module 1 - Basic Maneuvers

In this module, you'll learn the basics in flying a Multi-Engine aircraft. The instruction for the Multi-Engine program is in a BeechCraft Travel Air or Piper Seneca I. The duration of this course is approximately 10 hours. The duration for a Private Pilot Multi-Engine is approximately 15 hours. You'll be performing the following maneuvers:

• Steep Turns
• Stalls
• Minimum Controllable Airspeed or MCA
• Vmc Demonstration
• Drag Demonstration
• Single Engine Operations with "Feather and Secure"
• Emergency Operations
• Normal and short Field Takeoffs and Landings

• Multi-Engine Aerodynamics
• Factors of a Critical Engine
• Factors of Vmc
• Performance Consideration
• Single-Engine Operations
• Multi-Engine Aircraft Systems
• Propeller

Module 2 - Instrument Privileges

This is a continuation of Module 1. This module take approximate 5 additional hours of instruction to complete. If you want instrument privileges with your Multi-Engine Rating, the following additional topics will be covered:

• ILS and VOR Approaches; Normal and Single-Engine
• Circle to Land Approaches

Module 3 - Commercial Instrument

This module is a continuation of modules 1 and 2. In this module, you'll be performing all the same maneuvers covered in your Single-Engine Commercial License. An addition of approximately 5 hour of flight instruction will be given on the following topic:

• Emergency Descents
• Short and Soft Field Takeoffs and Landings
• Emergency Operations
• Stalls
• Steep Turns

Along with approximately 10 hours of ground instruction in the following areas:

• Performance Limitations
• High Altitude Operations
• Minimum Equipment List
• FAR Part 135.1
• Airspace
• Stall Spin Awareness
• Cross Country Flight Planning
• High Performance Systems